Product Quality Engineer

About Menlo Menlo Research is an Applied R&D lab building Asimov, an open-source humanoid robot platform, and the full software stack that powers it. Our mission is to make humanoid labor economically viable, turning software into physical labor at scale. We build across the full stack: hardware architecture, locomotion, autonomy, simulation, and infrastructure. We move fast, ship to real robots, and open-source everything we can. If you want your work to matter beyond a paper or a demo, this is the place. The Role Asimov gets built at scale on someone else's line. As Product Quality Engineer, you are Menlo 's quality owner at our contract manufacturer, responsible for the final assembly and test of the robot from the first trial build through mass production. You make sure what comes off the CM line matches what our engineers designed, every unit, at rate. You will own process yield, define and enforce final inspection criteria, and run the customer side of quality at the EMS partner. You will live in the phase gates, EVT, DVT, PVT, and into MP, catching the defects, drift, and process gaps that decide whether a ramp succeeds or stalls. This role sits between our design teams and the factory floor, and holds both to the standard. What You'll Do Own final assembly and test quality at the CM (Tier-1 / EMS), from trial production through mass production Drive process yield: monitor first-pass yield and defect rates at each station, run the analysis, and lead the CM to close the gaps Define, document, and maintain final inspection criteria, including inspection standards, limit samples, workmanship standards, and pass/fail criteria for the line Own the customer inspection and acceptance process: OQC, outgoing quality gates, AQL sampling plans, and lot disposition before shipment Represent Menlo through the NPI phase gates (EVT, DVT, PVT), driving build readiness, defining test coverage at final assembly and test, and signing off on quality exit criteria for each phase Lead root cause analysis and corrective action on line failures and test escapes, using structured methods such as 8D, fishbone, and 5-whys, and verify the fix holds Set up and audit the CM's process controls: FAI, in-process inspection, SPC on critical parameters, and change control on the line Manage non-conformance at the CM: MRB, containment, rework and sorting decisions, and disposition of held material Track and report quality metrics (yield, DPPM, defect Pareto, RTY) and drive continuous...

Summary and match are AI-generated; verify details on the original posting.

Listed via Himalayas. All sources